Search options (Page 59 of 59)

looks like you had a good turn out. was  busy day at work couldnt get off early to come out and play.

test ran fly 908 ran ok with the stock tires on it. had some wheel hop to it. most of that was due to the play in the stock axile bushings. did the super glue trick and  will see what that did for it. still need to put urethane on it. did swap in a straight axile for the steers.

fly 908 and a Difalco Neo DD301 30-Band

with the slot it axile stock gearing and tire size would have to stay the same.inserts installed, stock motor and chassie.  I dont want to dump a ton of cash into then either.maybe down the road we can run the same carss but up grade the 3d chassi and hotter motors ect. but for now keep them close to stock as we can.

this is what I want to get going. there all can am except the gt40 but same wheel base maybe we can run a class c also most guts have one of those. I dont but that can be fixed
Matra MS670: CA27a, CA27b, CW18
McLaren M8D: CA26d, CA26c, CA26b, CA26a
Ford MK II: CA20c, CA20b, CA20a, CW10
Ford GT40: CA18d, CA18c, CA18b, CA18a, CW16, CW09
Chaparral 2E: CA16b, CA16a, CW08
Alfa Romeo T33/3: CA11h, CA11g, CA11f, CA11e, CA11d, CA11c, CA11b, CA11a
Ferrari 312 PB: KF01a, KF01b, KF01c, KF01d, KW01
White kits (with rtr chassis) or White Body Kits (body only) are also available for most models, if you want to do a custom livery.
Brand: Slot.it

remove the wires from the guild and unsolder wire from the motor. the slot it guilds come with a template to drill a small hole in the chassi for the led. hot glue or two sided tape the chip in and run your wires to the guild and solder the othe end to the motor. biggest thing is to make sure you dont have the motor leads touching each other or the motor or it cause it to short out. heres some pics from greggs site on then installed
http://www.ggaub.com/slots/cars/Cars/Sl … n_Chipped/
you might have to do a little work to the underbody also

are those 1/24 scale? what the specs if I wanted to build one and come out and race?

Thanks for having me over. time for me to get my own controller and set up some anlog cars.

thinking on following the draw guys spec on the classic class I would like to get going
ppendix A: Model List
Matra MS670: CA27a, CA27b, CW18
McLaren M8D: CA26d, CA26c, CA26b, CA26a
Ford MK II: CA20c, CA20b, CA20a, CW10
Ford GT40: CA18d, CA18c, CA18b, CA18a, CW16, CW09
Chaparral 2E: CA16b, CA16a, CW08
Alfa Romeo T33/3: CA11h, CA11g, CA11f, CA11e, CA11d, CA11c, CA11b, CA11a
Ferrari 312 PB: KF01a, KF01b, KF01c, KF01d, KW01
White kits (with rtr chassis) or White Body Kits (body only) are also available for most models, if you want to do a custom livery.
Brand: Slot.it
Type: Classics (see appendix for complete list)
Min Weight: 60g
Max downforce: 10g (motor downforce only)
Magnet location: No traction magnets.
Rear Tires/prep: Slot.it F22, Part# PT27 or PT1207 are both acceptable. May be glued and trued. Prep allowed as long as tires are dry and non-tacky on race day. Must be within fenders when viewed from above.
Voltage/Power%: 11v when variable, or 80% max power on fixed voltage tracks

Front tires/prep: stock tires may be glued, trued, and coated for zero friction. Zero grip tires from slot.it allowed.
Added weight: no more than 10g total added ballast, any substance in any location.
Guides: Stock
Braids: Stock
Wiring: Stock
SSD Chip: ANY SSD compatible chip allowed. Slot.it SP15b recommended.
Chassis: Stock. May be sanded for float. Max gap .5mm
Screws: Stock screw, must be taped over if loose to prevent loss into slot.
Gearing: Stock (11/32)
Motors: Stock (orange can)
Pods: Stock (Sidewinder configuration)
Wheels: Stock
Axles/Spacers: Allowed, but all wheels/tires must be within fenders when viewed from above.
Interiors: Stock. Min mods needed to fit chip allowed. Material removal for weight reduction not allowed.

Race Format: Heat racing with step-up. Full racing simulation using RCS64 including damage/repairs and false starts.

got lots of cars like race gt with out the magnets.  have a gird of t/a cars. but hav'nt gotaround to pulling the mags on those. looking at trying to get a class of slot it classic going. just got one of the McLaren M8D Can-Am cars also have  few other slot it cars lmp lola and Nissan R390. rest of the cars are Pioneer or scaleys.