Search options (Page 50 of 56)

Na we just have to make sure he and Amy are in the same heat races. those two are like magnets when they race for some strange reason..........

Chris just slowly but steady pulling away one point at a time with the lead.....

ok this is what we came up with for new scalextric GT3
gt3 rules
scaly gt3 cars only
must have lights. we are going to be racing with the lights off at times
car must of raced in the gt class during or after the 2013 season
no after market axiles must run the stock or replacement scaley axile
Except for the following allowances, car should be box stock.  Specifically this means-

Stock motor

Stock body and chassis (wheel wells may not be altered)
stock wheels and axiles

The allowances
Traction magnet must be removed
Any rubber/urethane tires may be used
Tires may be glued and trued on the wheels
Guide and braid are free to replace/modify
Guide may be shimmed to appropriate depth for track
Grinding to fit (lead, brass, etc...) weight in is acceptable.  Grinding to remove weight is not.
It is permitted to glue bearings into the chassis
It is permitted to glue the motor into the chassis
It is permitted to apply glue inside bearings to eliminate slop of oversize bearings
Chassis may be filed along its perimeter for float, but do not remove more than 1/16" of material
Valances and other bodywork may not be separated from the chassis
If it's not mentioned, you can't do it
list of cars that ran in the gt class there may be some i missed but theses are ones that scaley makes.

    Aston Martin     DBRS9
    Lamborghini     Gallardo  GT3
    Corvette     GT3
    Ferrari     F430 GT3
    Porsche     911 GT3 get the new inline set. the older side winders cars dont work well at all
    Audi     R8 LMS
        BMW     Z4 GT3
    Mercedes-AMG     SLS AMG GT3 scaley has  new chassie with in line motor coming out mid summer. the older one is front motor set up
    McLaren     MP4-12C GT3
        Aston Martin     V12 Vantage GT3
        Chevrolet     Camaro GT3 ak dont wast your money gettting one they suck big time
    Bentley     Continental GT3
    Lamborghini     Huracán GT3 dont belive scaley makes one of these yet
    Nissan     GT-R Nismo GT3
    Dodge     Viper Competition Coupe Series another front motor car.
    Ford     GT GT3

trucker ugly

still up in the air on that. maybe  this was my take from another post. If do end up making this a class I think going with a cut off date,say any car that ran in the gt class from 2013 to present would be legal to run and sticking with one make of car would be the best way to go. Even  so Carrera does make some nice gt3 cars but they are very heavy and if I'm not mistaken the motors do not run great on anything under 14 volts so a motor swap would be in order to make them run with Scalextric cars.. If do allow them in. then a fixed factory 18k motor must be used. such a h&r or something that can be easy to id

what do you think?

found a few dirt cheap gt3 on ebay
http://www.ebay.com/itm/Scalextric-Bent … SwcwhVMXrL
http://www.ebay.com/itm/Scalextric-Avon … SwaNBUi0zV
http://www.ebay.com/itm/Scalextric-Avon … SwaNBUi0zV
http://www.ebay.com/itm/Scalextric-C328 … Sw44BYeNVG
these make good runners also
http://www.ebay.com/itm/SCALEXTRIC-C328 … xyyq5TOKNw
http://www.ebay.com/itm/Scalextric-1-32 … Sw4CFYthEY
This one has Chris written all over it. It should be legal to race.I do believe  they raced them last in the 2013 season.
http://www.ebay.com/itm/Scalextric-1-32 … Sw7XZXg7iL
just some samples. might get that bently just because it so cheap and would make a nice add on to my digital fleet

you need one of these Bill
http://www.ebay.com/itm/182372524150?_t … EBIDX%3AIT

If do end up making this a class I think going with a cut off date,say any car that ran in the gt class from 2013 to present would be legal to run and sticking with one make of car would be the best way to go. Even  so Carrera does make some nice gt3 cars but they are very heavy and if I'm not mistaken the motors do not run great on anything under 14 volts so a motor swap would be in order to make them run with Scalextric cars.. If do allow them in. then a fixed factory 18k motor must be used. such a h&r or something that can be easy to id.
Hey this car has your name all over it Monte
Scalextric BMW Z4 GT3 - Daytona 24 Hr 2015  C3720

Hey my limp is almost gone.

I was thinking more like the f1 class run them with rocket ships but they would be there own class and class win.

Nothing some red flames wont fix