Come out and have a good time & see what else is going to happen currently and at later dates to be announced.

27

(4 replies, posted in Cars)

So now I know. Thank you, Bill, for all you do for the club.

This is a list of parts it takes to build a 1/24 scale hardbody chassis;

K&S 8228  1" brass width .090" for center section cut to desired length.
K&S 8227 3/4" brass width .090 for side pans cut to desired length & width.
K&S 504  .063 steel panino wire cut to different lengths. You will possibly need as much as a 3-foot length.
K&S 8242  1" brass strip .032
K&S 8126  3/32 brass round tube.
K&S 8150  3/32" brass square tube.
K&S 9880  1/8" brass 90-degree angle.
K&S 8264  1/8" brass rect. tube.
1" or 3/4" rear motor bracket to fit the motor you are going to use and how wide the body is that you are making the build for.
One guide tongue your choice.
Sonic .063 brass retainers.
3/32 drill blank axle.
1/8" o.d. brass tube for axle spacers.
One 3/32 crown gear your choice 37 - 42 tooth count.
One pinion gear generally 8 tooth.
Guide flag, nut & spacers & two sections of copper braid.
Wires for motor to guide.
One Pro Slot S16D motor & two motor screws.
One set front wheels 3/4" tall. your choice.
One set rear wheels sponge tires to fit 3/32 axle .790" - .830" diameter @ .400 height your choice.
The picture below is just the brass & steel wire for part numbers.
I think that is everything.

Here at Dust Devil Slot Cars, we sell everything listed above. We also will show you how to solder and lay out a chassis to be built correctly, or if you just want a little help. If you have any questions or need pictures, please let me know. 541 527 9314 or text.  Jim
https://i.postimg.cc/kgH1CgTM/DSC06241.jpg

OSCAR 1/24 Scale Sports Car race Friday March 12-13, 2027 in central Oregon at Dust Devil Slot Cars Powell Butte, Oregon. If you need directions, please call 541 527 9314.

Friday, March 12, 2027 OSCAR Sports Car practice day. Doors open at 2:00 pm. Track closes at 8:00 pm.

Saturday, March 13, 2027 OSCAR Sports Car Class race day.  Doors open at 8:00 am. Tech inspection at 9:30 am. Racing starts @ 10:00.

Entry fee is $15.00 and includes lunch & beverages.

Thank you,
Jim Mitchell
14049 SW Quail Trail
Powell Butte, Oregon
541 527 9314 or text

30

(3 replies, posted in NASTE)

Thank you, To everyone who got this magic accomplished.  Jim

31

(41 replies, posted in Modifications)

Thank you, for your kind words.

32

(41 replies, posted in Modifications)

Hello Racers, Builders & Collectors,
#10

This is a 2002 reissue slot car body from Tamiya for this build. The body is a 1966 Lola T70 Spider Spyder. The Lola T70 had three versions from 1965-1969. The three versions were Mk1, Mk2 & Mk3B.
 Some of the drivers of that time racing a Lola T70 were John Surtees, Dan Gurney, Steeve McQueen, Peter Revson, Bob Bondurant, Mark Donohue, Walt Hansgen, David Hobbs, Denny Hulme, Parnelli Jones, Roger Penske, Brian Redman, Jackie Stewart and many others drove these cars in all out competition. 
  I painted this body in British Racing Green and painted all the detail. The bare chassis is untested, No motor, guide, gears, wires & will need new rear tires. I will get all the running gear finished when a race is announced.
I have built this car for the USRRC / Can/Am class hardbody races.
 If you have any questions or want to see more pictures, let me know and I will do my best to answer them.  Jim
https://imgtree.co/direct/_cjRmEc2.jpg
https://imgtree.co/direct/MfbhRWxm.jpg
https://imgtree.co/direct/py1Hd7su.jpg
https://imgtree.co/direct/Kqg1OuIg.jpg

33

(37 replies, posted in Slot Talk)

The box looks like it is in really good condition, and I am sure it will work very well for you. Michael is very happy with the one he has, it is very similar and it works very well and holds a lot of stuff. I have been looking for the same pit box for me. The pit box is the best I have seen for slot car use. If you have the three top dividers, use them or make some, to hold all the tools at the top for easy access. Jim

34

(41 replies, posted in Modifications)

Hello Racers, Builders & Collectors,
#9
 This month I have built a chassis for a Shelby Series 1 Roadster made by Revell; the model is available from e-bay, national Hobby Shops and some Hobby Lobby Stores. The body is painted blue and all the detail is finished and ready to run. The car has tested very well and it will compleat in upcoming selected sports car races.
 All the parts and tools I use to build a chassis are readily available from many different outlets like Ace Hardware, Amazon, e-Bay, National Slot Car Shops, National Tool Shops, online outlets & other stores. If you cannot find what you are looking for, I sell almost everything to build a chassis here at Dust Devil Slot Cars. If I do not have it, or you want to know where to get, I will tell you where it can be had at the best price. I will also show anyone how to solder correctly and how to build a chassis here at Dust Devil Slot Cars. If you have any questions or need more pictures let me know and I will do my best to answer them.  Jim
https://imgtree.co/direct/Lf-uiwnB.jpg
https://imgtree.co/direct/WllE9pyf.jpg
https://imgtree.co/direct/OkaW--l3.jpg
https://imgtree.co/direct/FnaJpE6Z.jpg

35

(21 replies, posted in Cars)

Hello Bill,
Can you set a side 1 - Ferrari 612 Lola & 1 - Lola T-162 Can Am along with the Shelby.
Thank you, Jim

36

(0 replies, posted in Slot Talk)

This is why I build different chassis for different car bodies. All car bodies were not created equal.

  I do not have a cookie cutter jig to build the same chassis over and over. and I do not want one. If I did have the cookie cutter jig, I would not be able to make any changes for the better or worse to try out. The chassis would only fit a Chevrolet, NASCAR, Mopar Challenger / Barracuda, Ferrari 360, or a Porsche 962 body and not much else. The chassis & car bodies would all be the same but painted differently as in the IROC series. If that is what you like, I have no problem with that.
  I want to race a different body with no more than one other car body the same at any given race. I am at the race to have fun. I think most of the racers are there for the same reason and to see if their favorite body style can win. If everyone is racing a Cuda Trans/Am or a Chevrolet NASCAR body. Who do you think is going to win? There is no diversity and to me that gets old fast. 
  Ask yourself why everyone likes the Le Mans, Can / Am, or Sports Cars / GT racing so much back in the 1950's - 1970's? Is it because all the race cars were different?  With the new body styles, aerodynamics, motors, wheels, etc.  Yes, there a few teams running the same two or three cars but in a field of 30+ cars entered in a race that is not bad. The viewer does not have to watch the same auto makers running the same car for all 30+ entrees.
  Originally a race car was of different builders with different ideas, building different bodies, motors, chassis, using new style wheels, tires etc. Building new technology in different directions believing what they have built is a winning combination, rarely winning more than three races in a season with different drivers at the wheel.
  Agree or disagree; that is my view on racing.

 Picture one; Some of the Can/Am hardbody I have built; all the cars pictured have had the chassis built & tested. Some of the bodies still need to be painted, interior, & decals.

Picture two; Sports Car / GT hard body; all the cars are ready to race except the red Mustang T/A that needs paint & assembly.  

Picture three; Lexan 4"; All the cars are retro brass / wire chassis with a Can/Am / USRRC body. They are all set up, tested and ready to run (angle winder, side winder & inline). A few bodies still need decals and a driver.

 No picture hardbodies; I do have a Clubman, Trans/Am, Ford NASCAR, & Le Mans cars, all are undergoing testing, repair and paint for the upcoming season.  I am building other chassis for cars that are in the works on the work area. 

  All the cars pictured, are just some of the chassis I have built and kept for myself and would like to race. Every chassis I have built is different, I do not believe I have built any two chassis the same.
 I would like to thank all the racers who have chosen me to build their many different chassis that are not pictured.
 
If you have any questions, or want to see more pictures? Let me know and I will do my best to answer them.  Jim
https://cdn.imgtree.co/images/gMMnduQf.jpg
https://cdn.imgtree.co/images/mPinP1dD.jpg
https://cdn.imgtree.co/images/kIxlgvik.jpg

37

(41 replies, posted in Modifications)

These chassis handle very well. We will be racing this chassis as well as other brass / wire chassis from the 1980's - 1990's and retro, home built / kits here at Dust Devil Slot Cars. I will be posting the rules and race date very soon.
If you need a copy of the rules I can e-mail them to you or anyone else.  Jim
https://i.postimg.cc/6pSXPwR6/DSC06064.jpg

38

(41 replies, posted in Modifications)

Slot Car Chassis build of the month
#8
Hello Slot Car Builders, Collectors, & Racers:
  This month's build is completely different than what I have shown up to now. I have built a Retro Brass & Wire chassis, from a partial brass chassis kit. The body I made the chassis for is a USRRC 1965 Mirage sports car to run in retro USRRC - Can/Am races. The body is .015 and is reverse painted in maroon. The driver will be in the driver's seat with the steering wheel and a rollbar before the race starts.
 The basic kit consists of five parts. (picture four) The rest is what you put into it. There are no instructions. I have seen this kit built in many different configurations with different ideas on how to connect the different brass parts. The width, length, & steel wire configuration, this is left up to the builder. I narrowed the brass side pans and shortened the center wires to fit this reproduction body from the late 1960's to the early 1970's. The chassis has a short 3 3/4" wheel base, with a 2 11/16" width. The front wheels are JK 5/8". The motor cooling fins I made.
  If you have any questions or want to see more pictures, let me know and I will do my best to answer them.  Jim 
https://cdn.imgtree.co/images/-Jt1DihY.jpg
https://cdn.imgtree.co/images/jLDMZgGz.jpg
https://cdn.imgtree.co/images/xkEvsbrh.jpg
https://cdn.imgtree.co/images/GkDbsx2W.jpg

39

(2 replies, posted in Dust Devil's Slot Cars)

Dust Devil Slot Cars will have open track days for testing & tuning. Starts June 27 2026 - 12PM - 9PM Friday, Saturday, Sunday, Monday and runs until Oct 1 2026. Come out and see the all-new slot car shop. Racing, Parts, sales, Service, vintage, retro & modern slot cars. How to build a slot car chassis, How to set up a slot car chassis, how to build a 16D / C- can motor. Become competitive at slot car racing. The shop is eleven miles East of Redmond, Oregon Call or text for directions. If you have not been here before.  Jim

https://cdn.imgtree.co/images/6bS0aBrm-thumb.jpg
https://cdn.imgtree.co/images/rGUJjpoP-thumb.jpg
https://cdn.imgtree.co/images/98Se1MN6-thumb.jpg
https://cdn.imgtree.co/images/6XK1yCRS-thumb.jpg

40

(41 replies, posted in Modifications)

Slot Car Chassis build of the month
#7
Hello Slot Car Builders, Collectors, & Racers:
 This month I have a 2005 - 2006 Ford GT body from Polar Lights for this build. The chassis is finished and has been tested at my track Dust Devil Slot Cars and ran very well. The body is painted Powder Blue and all the body detail is finished with Dan Gurney All American Racer decals. The motor cooling wings were made by me for this build to keep the Super 16D motor cool. This Ford GT was built for the OSCAR Sports Car Class.
 If you look at the chassis builds that I have done, the chassis may look similar but no two chassis are built the same. I build chassis for readily available model bodies that do not cost a fortune, then advise the owner to buy an extra model body of the same car in case of too much race damage and the body is falling apart. The owner can paint the backup body and have a new car again.  My big mistake was I built a sports car chassis for a Fujimi 1/24 Ferrari F355 Berlinetta model body for $24.00 and $5.00 to ship ten years ago, I did not think to buy a second body at that time. Over the years the body started getting beat up, now I need a new Ferrari F355 Berlinetta body.  Check the price of that body today, plus shipping. 
  As always, if you have any questions or need more pictures, let me know and I will do my best to answer them.  Jim

https://cdn.imgtree.co/images/8A2S7Zy1.jpg

https://cdn.imgtree.co/images/NkL4VNDQ.jpg

https://cdn.imgtree.co/images/LjKZzcx5.jpg

41

(2 replies, posted in Cars)

The bodies look great from Team Blue Groove. Are all the bodies for sale and how much are they?  I really like the Shelby Cobras and the Can/AM bodies.   Jim

42

(41 replies, posted in Modifications)

Hello Kevin,

It seems to give the larger chassis better handling in the corners when set-up correctly. I cannot really explain how or why it works. It is something I tried on the fourth slot car chassis that I made, and it seemed to work well with heavy chassis cars. I have made all the chassis that will accept that style rear end ever since.

I hope this helps, Jim

43

(41 replies, posted in Modifications)

Slot Car Chassis build of the month
#6
Hello Slot Car Builders, Collectors, & Racers:
 This month I went back to my favorite body maker Doug Haynes of Resilient Resins for this build. The body is a Chaparral mk1 of driver / owner / builder Jim Hall (another fan favorite).  This chassis was built for the Chaparral mk1 car body only I do not expect the chassis to fit any other body, but I really do not know or care, because I do not use specific built chassis for one car body to fit other car bodies (it rarely ever works). The chassis is finished and was tested with the body on, at Dust Devil Slot Cars in Powell Butte, Oregon. I have surface primer painted the body in white and finished the white paint; The trim is finished. The decals and the driver, roll bar and new rear tires will be added before the race.
 I am slow at getting the cars painted because I am building chassis for myself or other racers in the club.
 As always, if you have any questions or need more pictures, let me know and I will do my best to answer them.  Jim
https://8upload.com/image/d84faea7f4e29848/DSC05993.jpg
https://8upload.com/image/8e6cd5fd2045c7b8/DSC05999.jpg
https://i.postimg.cc/tRDhfZLz/DSC06108.jpg

44

(7 replies, posted in Modifications)

Hello Kevin,
Are you going to the Spring Water Trans/AM race this Friday? I will be there and can help with building pointers that I use, also Stewart may have some pointers? Do not buy a solder gun or solder pencell station...

Jim

45

(7 replies, posted in Modifications)

Hello Kevin,
Here is a you tube video that may help in building slot car chassis. I have not met you, so I do not know if you have seen this video. There are four parts to the video, and it does have some good ideas. The guy is building a 1/32 chassis, but a chassis build is the same idea as a 1/24 scale build. If you have not seen it, you may want to take a look. (I first saw the video about six years ago).
https://www.youtube.com/watch?v=rO6PbSx … mp;index=2

Jim

46

(11 replies, posted in Cars)

Hello Steven,

Pick-a-day any day and I will be there with a truck load of parts & cars in boxes new & used. Sign me up for this event... (I love a good swap meet)

Jim

47

(7 replies, posted in Freedom Raceway)

Hello Steven,

The track looks cool and challenging. Very nice work on the track build, setup and it looks great.
When is the next race and what are you going to be racing?

Jim

48

(41 replies, posted in Modifications)

Hello Kevin,

Do you have any pictures of the car? What are the rules for Pelican Park Hard body races?

Jim
Timedistance@outlook.com

49

(41 replies, posted in Modifications)

Slot Car Chassis build of the month
#5
Hello Slot Car Builders, Collectors, & Racers:
 This month I went back to my favorite body maker Doug Haynes of Resilient Resins for this build. Doug always had great affordable bodies that you could never find anywhere else. This body is a McLaren mk1B some people call it a McLaren mk2 of owner / builder / driver Bruce McLaren (always a fan favorite).  This chassis was built for this Mclaren mk1B slot car body only. I do not expect the chassis to fit any other body, it may fit other Resilient Resins bodies, but I really do not know. The chassis is finished and was tested with the body on, at Tom's World in Bend, Oregon. After testing, I surface primer painted the body in Tamiya white, with the final Tamiya flat white paint then added the lime accents and new rear tires. The roll bar is .063 K&S wire with a used hard plastic windshield from a Strombecker lotus 30, there was some old glue from the previous body. It is hard to find good clean windows. I will add the driver later & new rear tires before it is raced next. I have already cut the excess wire on the rear.
 As always, if you have any questions or need more pictures, let me know and I will do my best to answer them.  Jim
https://8upload.com/image/8d1df535edc84019/DSC06001.jpg
https://8upload.com/image/2b0a4f496681abf8/DSC06007.jpg
https://8upload.com/image/81033cc0afa630a8/DSC06005.jpg
https://8upload.com/image/0fb8b3c408f105ca/DSC06004.jpg
https://8upload.com/image/03dc4c21a1325a40/DSC06002.jpg

Sign me up... Professor Fate