• Registered: January 18, 2019
  • Posts: 528

Topic: Flattening chassis

Al and I were talking about this last night after racing, so I thought I would post the link here. Most of the fast cars I have been building on out of Slot.it platforms has this technique employed on both the chassis and the motor pod.

Also make sure that after the motor is installed and tight the pod is not tweaked. I have had to do a lot of sanding on some pods to keep them perfectly flat after the motor is installed.

Link to the flattening process, Just copy and past you should get it!

http://www.slot.it/Download/FAQ_PDF_en/ … sis.en.pdf

Zack

  • wb0s
  • wb0s
  • Administrator
  • Offline
  • From: Vancouver, Washington
  • Registered: June 16, 2008
  • Posts: 5,730

Re: Flattening chassis

Thanks Zack!

wb0s's Website

  • From: Hillsboro, OR
  • Registered: June 15, 2008
  • Posts: 1,748

Re: Flattening chassis

Zack, you can check the links page, we've got that as well as other helpful tips on that page.

If there are others, we are happy to add them.

"Big Smooth"

kidvolt's Website