Topic: DocDooms's new Scaley GT3 Class
I talked with our Scalex contact and we can get a 15% discount on a group order.
I'm in for two.
Contact me if you're interested and we'll get this going.
"Big Smooth"
Re: DocDooms's new Scaley GT3 Class
I'll be good for one or two as well.
Re: DocDooms's new Scaley GT3 Class
Im Also good for one or two. the new 911 and maybe one other
The secondnidator
- kidvolt
- The Decider
- Offline
Re: DocDooms's new Scaley GT3 Class
Yup, the 911 is how I hear it. We should probably all get one. 
"Big Smooth"
- wb0s
- Administrator
- Offline
Re: DocDooms's new Scaley GT3 Class
I just received my $25 Scalextric Bentley today....I'll be somewhat generic......
Re: DocDooms's new Scaley GT3 Class
Is there an official list from which to choose like the prior event, or just pick any one we'd like?
I know it's predictable but I wouldn't mind that white FGT.
- kidvolt
- The Decider
- Offline
Re: DocDooms's new Scaley GT3 Class
Chris, do you mean a list of what we can pick from? I think anything that would be on Doc's list should be ok if available.
"Big Smooth"
- wb0s
- Administrator
- Offline
Re: DocDooms's new Scaley GT3 Class
Here's the rules as I posted them. There are elligible cars listed, but I believe Doc maybe open to additions to the list. Doc will be the final say as far as what cars are added to the list.
Class 9 - GT3
GT3 Rules
Scalerxtric GT3 cars only.
Must have lights. We are going to be racing with the lights off at times.
Car must have raced in the GT class during or after the 2013 season.
No after market axles - must run the stock or replacement Scalextric axle.
Car must be box stock. Specifically this means-
Stock motor.
Stock body and chassis (wheel wells may not be altered).
Stock wheels and axles.
The following modifications are allowed -
Traction magnet must be removed.
Any rubber/urethane tires may be used.
Tires may be glued and trued on the wheels.
Guide and braid are free to replace/modify.
Guide may be shimmed to appropriate depth for track.
Grinding to fit (lead, brass, etc...) weight is acceptable. Grinding to remove weight is not.
It is permitted to glue bearings into the chassis.
It is permitted to glue the motor into the chassis.
It is permitted to apply glue inside bearings to eliminate slop of oversize bearings.
Chassis may be filed along its perimeter for float, but do not remove more than 1/16" of material.
Valances and other bodywork may not be separated from the chassis.
If it's not mentioned, you can't do it.
List of Scalextric cars that ran in the GT class that are currently eligible. Other cars may be added to the list as approved by class sponsor.
Aston Martin DBRS9
Lamborghini Gallardo GT3
Corvette GT3
Ferrari F430 GT3
Porsche 911 GT3 - Get the new inline set, the older side winders cars dont work well at all.
Audi R8 LMS
BMW Z4 GT3
Mercedes-AMG SLS - AMG GT3 Scalextric has the new chassis with in line motor coming out mid summer. The older one is front motor set up
McLaren MP4-12C GT3
Aston Martin V12 Vantage GT3
Chevrolet Camaro GT3 - Don't wast your money gettting one, they suck big time.
Bentley Continental GT3
Lamborghini Huracán GT3 - Don't believe Scalextric makes one of these yet.
Nissan GT-R Nismo GT3
Dodge Viper Competition Coupe Series - Another front motor car.
Ford GT GT3
Maserati Trofeo - Technically not GT3 but allowed.
Class Sponsor: Dan Fritz
These rules are posted in the Forum here: http://naste.org/forum/viewtopic.php?id=630