You are not logged in. Please login or register.
The NASTE Forum → Posts by docdoom
I'm thinking if we start at noon, we can be done by 4 pm. That gives me time to prepare for my play at 6:30. Does that time work for you? (And others?)
no go 4 me working hours 7 till 3ish have fun all
Doc, the engine has about 200 miles on a rebuild. We should be good.
It not even broken in yet...worst thing to do is let a motor sit seals dry out ect. Drive it like you stole it at least once a month..
I don't know....has the Alfa actually ever gone that far?
Only if there a case of oil and bag of tools in the trunk
Big race at Bill Saturday so getting drivers is going be tough. Next Saturday looks like it open no racing.I have to work so I couldn't do it till after 6pm.
Another great night of racing was to had at Al's man cave. We had 7 racers show to battle. Up 1st was sports car one and the zerex special was the class of the field and took the win. I'm retiring the car from the class just to dominating with the current set up. AL was 4 laps back in another scratch built car and Rico in third with a rental. Next on the docket was revo slot and there was a little rubbing and elbows out. There was more than one forced off by drivers trying to get that little extra in the corner. No blood was spilled so all was good in the end. Doc was able to squeeze out the win over a hard charging Al with Greg taking 3rd. Last race was open and 1st heat and it was clear Rico was out to to take no prisoners with a really fast run in red. One force off in white and a less than steller marshing job by no other than me cost Rico and in the end Al took the top spot with Rico just 2 tenth behind and Doc in 3rd. One note is to make sure that all cars running are on rubber or urethane. Had one car racing that had silicon installed and following drivers did struggle for grip..lesson learned...
Good luck. Don't forget get us nobody's when you get to Hollywood..
Do the tires sides on the back match those on the front? Jeff was a tire changer.
After taking a good look they are nsr Evo on the back.the gt does have factory rubber on all 4 corners
Yes on the Ford gt not sure what's on the BMW I got that one from Jeff half built they are the tires that came with it from Jeff.
No up grades needed with the sideways cars. That BMW and Ford gt are bone stock. Just glue and trued tires and little weight.
I have few Scalextric cars thar are great runners. One is a Mercedes gt3. Great runner even with all the stock running gear.
Anybody wish to comment yes or no???
So lets talk class rules.
Some racers are asking/discussing a rule change when it comes to the GT3 rule package we are running.
Some are happy with the rule set while others want to change to more pro car builds using the current race kits from NSR, Sideways, ScaleAuto, etc.
I would like to keep the rules simple.
1. Any GT3 car is legal from any manufacture. 3d printed cars and chassis will be legal if purchased from a manufacturer. Example: Area71
2. Motor pod open - can be inline angle or sidewinder - open gearing.
3. Rubber tires only. Any manufacturer Rubber tires are allowed.
4. Tires may be glued and trued.
5. All weight must be on inside of body/chassis.
6. Guide and braid are free to replace.
7. 20k rpm motor limit.
8. IMSA Pro GT for the new cars (non-Scaley) and GT3 Grand Am for the Scalextric cars.
Race results from the March 7th race.
SINCE the results are posted let's put the stories to the picture. The number 4 was themn for the night with all the winners having that number next to there win. Up 1st was Le Mans and Al proved that you don't have to spend a bunch of money to make a car go fast to take the win with pretty much stock fly 908. Doc made it easy on him with a rough red lane but two strong runs in the other two lanes help him secure the 2nd step. Up next was group c and Doc car was dialed to a razor edge and raced off to the sun set with Rico 2nd and Al taking the final step. Last race was open and these was the closest race of the night and when the dust had settled Doc edge out Al for the win. That was it for racing. Two week break before we race again
9.5 hours before the party begins..
Been missing u two at the track on Thursday. You all been missing some great racing..
Well one more odd Thursday race has come and gone. We had 6 racers make it out to battle on Al's man cave track. Up 1st was Trans Am. We were little easy on the rule set if the car had a 18k motor We let them run.we had a mix of 3d printed, brass and messaged stock chassis running tonight. Doc took the win with a stock chassis Scalextric camero with all slot it up grades followed by Al with another equallly Scalextric equipped car followed by Rico and greg tied then mitch with 3d printed Cuda chassis. Next was Revo slots and after we we figured out why Rico car sounded like a cat in heat. It amazing what few drops of oil will do..... we were off and racing. After much thought Doc decided to stick with is trusted Dodge Viper and not run the new Vett. His wise decision payed of with a commanding win followed by a very happy Greg in 2nd and a rejected Al in 3rd. Al spent days getting his car ready for the race.he had a car that could of taken the win but to many forced offs and few helped offs cost him time and laps on the track..next up was open and Doc put in a blistering opening heat and never looked back and pulled out the broom for the night. Al was 2nd followed by Ricco in 3rd. Back to back odd Thursday up next is LA Mans and group c. See you all at the track.
Race results from February 29, 2024
can't turn away from a green race car
Following the Trans Am race at The Gorge Raceway on Saturday February 24th, a meeting of the PASER Club was held. In this, the first meeting, the ground work was laid for the re-organization of the club. It was encouraging to see some attendees in the meeting that actually could not make the race, but went the extra mile to make it to this meeting. We are all optimistic about what we can accomplish as a group to improve upon our racing program, and our club in general! Anyone (new racer or veteran) that is interested in being part of these ground floor activities is welcome!
PASER Charter Members as of February 24, 2024.
Looks like a police line up
Thanks Bob, I had fun despite loosing my wheel multiple times. I must learn to be better prepared.
UK
The worst day racing is still better than working when every body out racing..
Race report for 2/15/23.
we had 6 racers make it out to do battle On Al's track. Up 1st was classic sport car and Doc showed up with scratch bult zerex special.
on a side winder brass chassis and the car was hooked up and took the win. there was very close race for 2nd Rico was able to take 2nd with a fly 250lm and just 3 tenth back from Rico was David in a Doc tuned 250lm. one little off by David allowed Rico to take the 2nd step.
Next was slot it/Policar, Doc was able to repeat and take the win 2nd was once again a battle between Al gt40 and Rico's Ferrari 330 P4 if not for a rough red lane were nothing went right for Rico it could have been a whole different outcome in the finish order. but Al hung on and was able to take 2nd followed by Rico . That was it 4 the night Few stayed around and did some tuning on our revo slots for the next round of points races. full race results are to be posted
Proxy racing same way. Expect a bag of parts with your car return. ( if your lucky)
Iroc=== I regret offering cars
No car and I have to work so no show 4 doc
All depends on what day and time 4 me
Another odd Thursday race has come and gone. It was good night of racing with some very close finishes. Up 1st was gt3 and with these being a spec class the racing was pretty close through out the field in the end Doc was able take the win with Al 2nd and Rico. Up next was slot it dtm and when the buzzer went off it WAS very clear that Al had done some tunning on his car and it was a race. Doc had one quick off and that was all Al needed to scratch out the win by 3 tenths. Up next was open and we had yet another winner for the night with Rico taking the last win of the night with Doc 2nd and Al 3rd. That was it for the night
The NASTE Forum → Posts by docdoom
Powered by PunBB, supported by Informer Technologies, Inc.
