Search options (Page 18 of 59)

Damn Bill, that must have been painful to watch.

Slotcarcorner

1. yes
2. yes
3 yes and 7mm tires.
4 yes\
Division I: This is a spec motor class. Division I cars will be required to use the H&R 14k motor only. Class is limited to cars replicating cars built and raced through 1964*. Chassis construction must be rigid with no separate articulating pieces such as hinged side pans, motor pods, or suspension type front axle mounts. Podded chassis will be allowed in Division I provided the chassis motor pod mounting screws are tightened AND the pod is permanently glued making the chassis compliant with the solid chassis rule. No movement or dampening is allowed between the main chassis piece and the motor pod. Eligible car's rear wheel width* and tire contact patch must be 7mm or less. The tire width set is that of Revell Classic cars, specifically the King Cobra and Porsche 904. Track width must be no wider than the car's body width, tire and wheel must be completely within the body wheel opening*. No portion of the tire/wheel shall be visible when viewed from above*. Bodies shall not be modified to increase front or rear track (no fender flares or widening of body
Class 17 - Sportscar Era Class - LMP Era (LMP)
LMP Era (LMP) - Full fendered sportscars from 1994 through current which ran in FIA, IMSA, or SCCA sanctioned events. Any motors (22k limit), tires, driveline configuration, or chassis material may be used. Bodies must be injection molded or resin cast and not vacuum molded. Thunderslot brand RTR cars are NOT eligible for this class, but their driveline components (wheels, axles, gears, tires) and guide assembly may be used for tuning.

https://www.professormotor.com/product-p/pl1700k.htm

they show the Hudy. not seeing the SCALEAUTO

It is Festivus the holiday for the rest of  us and odd Thursday  race night. So who is bringing the aluminum  pole to set for the night so we can gather  around it and express  our grievance  over the past year. Should be some major lap time put down tonight with two very fast classes  being on the schedule.  Good luck to everyone  except  Al. Hope you loose a wheel or two.

Still think you should race the brown truck.
So We all know why no racing today. Bill was in the Batcave playing Dr Frankenstein on a slot car or two...

Well, let's do it then. need some simple rules.
1. Any resin body.
2. any 14-k motor in any motor setup.
3. open tire chassis can be 3d printed brass plastic ect
4. 1.5 mm min ride height

what class would that run in??????

Looking  like another  tight point battle season  shaping  up..

How is all that needs to be said about last night's racing.  Mr Prozac made a showing after along break from racing the 1/32 cars and him and ricci had a hell of a battle  in the lmp class with Zack taking the win. Up next was the points  race and more close racing was to be had here.  Al looked like he had the class covered till a late race cash with a back marker  snatched the victory  from  his grasp.  Doc took the win followed by Zack then Al . Up next was open and these had to be the race of the year so far
I'm just going  to let the result tell the stories when they are posted. Thanks again Al for hoisting and all the racers that made it out. See you all in two weeks.