You are not logged in. Please login or register.
The NASTE Forum → Rapid Raceway → Lexan 962
by racerbob » Mon May 06, 2013 4:33 pm
Hey racers,
Here is a suggestion that I tried and it worked well. I have an old hard body 962 and I cut the headlight buckets out and put them in the lexan 962. They fit perfect and they give protection for the lights. I just used filament reinforced tape to hold them in.
Racerbob
by howie » Thu May 23, 2013 10:49 pm
I think that is an excellent idea as the stock headlight buckets are pretty weak. I installed the stock ones and installed a piece of plastic after cutting out the headlights then glued in the lights. I believe your idea is better as I think the first hit may do some damage.
The previous posts to this topic were copied over from the Northwest True Scale Racers site with Howie's permission. The NTSR site is scheduled to close down at the end of this year. I will be copying over as much of the great information posted there as possible in the next few months. =====Bill
The NASTE Forum → Rapid Raceway → Lexan 962
Powered by PunBB, supported by Informer Technologies, Inc.