You are not logged in. Please login or register.
The NASTE Forum → Modifications → Latest chassis in the works
Here is Another Hanna style I chose to separate the center bar from the outer pan bar hopefully this design will work as good as the original Hanna
Chassis I also built a lot of travel for the center pan due to our tight corners and the way I drive maybe it will catch itself when I overdrive the corners at times………
Great looking chassis!
thanks, bill still learning with each build it was nice meeting you by the way
Yes, face to face is always good Kevin!
Hello Kevin,
Here is a you tube video that may help in building slot car chassis. I have not met you, so I do not know if you have seen this video. There are four parts to the video, and it does have some good ideas. The guy is building a 1/32 chassis, but a chassis build is the same idea as a 1/24 scale build. If you have not seen it, you may want to take a look. (I first saw the video about six years ago).
https://www.youtube.com/watch?v=rO6PbSx … mp;index=2
Jim
yeah i have watched it i am trying to work on being neater with my solder currently i am using a pen torch with a finicky flame adjustment looking at getting a gun that will maybe help
Hello Kevin,
Are you going to the Spring Water Trans/AM race this Friday? I will be there and can help with building pointers that I use, also Stewart may have some pointers? Do not buy a solder gun or solder pencell station...
Jim
Sorry prob not going to make that one. No torch only for the ones I have built
The NASTE Forum → Modifications → Latest chassis in the works
Powered by PunBB, supported by Informer Technologies, Inc.