1 (edited by ckouba October 31, 2017 10:12 pm)

Topic: BRM 1/24 Trans Am cars now available

8 to choose from- 4 Chevys, 4 Fords:

http://www.132slotcar.us/store/index.php?cPath=355_874

$140

The prototypes were excellent at the 24h last year.  I expect the same of the production versions.

If the interest is there, I will craft a set of rules in the same spirit of the other classes (box stock) and we will get these cars into the rotation.

Chris

http://www.132slotcar.us/store/images/BRM%20ScaleRacing069%202.jpg 
http://www.132slotcar.us/store/images/BRM%20ScaleRacing070.jpg
http://www.132slotcar.us/store/images/BRM%20ScaleRacing071%203.jpg
http://www.132slotcar.us/store/images/BRM%20ScaleRacing072.jpg
http://www.132slotcar.us/store/images/BRM%20ScaleRacing073.jpg
http://www.132slotcar.us/store/images/BRM%20ScaleRacing074.jpg
http://www.132slotcar.us/store/images/BRM%20ScaleRacing075%203.jpg
http://www.132slotcar.us/store/images/BRM%20ScaleRacing076.jpg

Re: BRM 1/24 Trans Am cars now available

I hope a new class would include the original versions.  Having two already i'm not excited to buy another one.  They do look nice though.

"Big Smooth"

Re: BRM 1/24 Trans Am cars now available

Wow, that first Camaro already has the wheels done.

Re: BRM 1/24 Trans Am cars now available

Fear not Monte, the prototype versions can play with the new ones. If there is any perceived advantage, that's a bridge we can jump off of later.

Re: BRM 1/24 Trans Am cars now available

Is it everyone's opinion that these will be what we race in Tacoma? Or do you suppose the cars will be Revo Slots?

Re: BRM 1/24 Trans Am cars now available

Revo's are 1/32 and the 24 is a 1/24 event, so I doubt it.

Re: BRM 1/24 Trans Am cars now available

What we get...

"a Special Edition pre production car supplied by BRM and ScaleRacing for each Team"

So this sounds like it rules out the new TransAm cars since they are production units.

Yes?

"Big Smooth"

Re: BRM 1/24 Trans Am cars now available

Speculation is rampant...

Re: BRM 1/24 Trans Am cars now available

I betting Special Edition pre production GT style cars

The secondnidator

Re: BRM 1/24 Trans Am cars now available

I don't need another slot car but... That seems to be turning into a mantra... but I'm very fond of those Camaros.

11 (edited by Todd February 9, 2018 10:08 pm)

Re: BRM 1/24 Trans Am cars now available

Purchased one from Alan at 132slotcar.us last week. Very nice authentic model.

Those who may already have obtained other BRM 1/24 Trans-Am cars may notice
mine sits lower. Tweaked the chassis, fixed a longer guide tongue with a JK guide
flag, removed a few thousandths off the front tires, replaced the 3 mm rear axle
assembly with a 1/8" axle housing to match all my other cars and exchanged the
hard rubber tires with large diameter Pro-Tracks. Shaved shorter the four mounting
posts so the car sits lower on the chassis.Chassis/track clearance is .55" front, .60"
rear. Some lead weight here and there. Added a little more detail to the driver figure.

https://i.imgur.com/L945st7.jpg

https://i.imgur.com/J3ctCIV.jpg

https://i.imgur.com/ilLrAqe.jpg

https://i.imgur.com/Qw2wq1g.jpg

Now have 3 of Penske' iconic s '60's cars. By the way there's a story about the
Camero's vinyl top.

https://i.imgur.com/cVwqq2p.jpg

One of the best accounts of Trans-Am racing in its hey day is author Dave
Friedman's book: Trans-Am. The Pony car wars 1966-72. MBI
Publishing Co, 729 Prospect Ave, P O Box 1, Osceola WI. 2001.

“The 1969 Trans-Am season had all the qualities found in one of Hollywood’s’ epic
Western Movies. There were good guys, bad guys, angry words, an uncaring sheriff,
treachery, cheating, suspense and several good shootouts. SCCA officials were
continuously accused of favoritism in the application of the rather loosely written
rules. Some of the rule infractions that were handled in a rather questionable manner
was the Penske vinyl top controversy”

Chuck Cantwell who was Team Penske’s top Engineer is said to have remarked,
"We acid-dipped our cars to reduce the overall weight. In 1969 we got a bit carried
away and the tops of the Cameros became so thin that they rippled. That’s why
we ran the first couple of races that year with a vinyl top to reinforce the roof.
Had we not done that the tops on the cars would have probably collapsed during
our first race at Michigan.” The book with its many photos contain several showing
the vinyl tops.

"Remember folks. Traffic lights timed for 35 mph are also timed for 70 mph." - Jim Samuals, Comic, owner of San Francisco's famous Holy City Zoo Comedy Club

Re: BRM 1/24 Trans Am cars now available

Looks great Todd!

Let's hear the vinyl top story!

=====Bill

Re: BRM 1/24 Trans Am cars now available

Hi Bill, thanks for the compliment. Edited my original posting explaining the top

"Remember folks. Traffic lights timed for 35 mph are also timed for 70 mph." - Jim Samuals, Comic, owner of San Francisco's famous Holy City Zoo Comedy Club

Re: BRM 1/24 Trans Am cars now available

Thanks for the vinyl top story Todd!

Hope all's well in the Eugene area! Say Hi to all the racers for me!

Re: BRM 1/24 Trans Am cars now available

Another great looking BRM!

Todd, how about a picture of the guide flag adjustment?

"Big Smooth"

Re: BRM 1/24 Trans Am cars now available

Now Monte, he replaced the guide flag. I believe our rules say stock parts, however his car looks like a lot of fun to drive.